How Can I Repair A Rip In My Leather Car Seat

How To Repair A Leather Auto Seat

Thursday, June 11, 2022

How-To Guide - Leather Car Seat Repair

By: Kevin Reilly
Practise y'all have a damaged leather machine seat? Rips, tears, or holes typically develop in the seats that get the most apply (often the driver's seat), and they can take many different shapes. "Seam tears" that go all the manner through to the seat cushioning brand for the cleanest fix, while surface tears and cracks (that keep spreading the more you lot go far-and-out of your car!) nowadays more of a challenge. It just so happens, I had both types of damage in my own driver's seat! In this guide, we're going to walk through how to fix two types of leather damage in a way that volition last and look great.

How to fix a tear that goes all the way through the leather automobile seat (such every bit a "seam tear"):

Cut a piece of denim larger than the torn area.
Insert the denim into the hole, and middle the patch under the torn surface area.
Dispense Tear Mender into a paper basin, and dip your finger into it (don't worry, information technology volition skin off your finger easily!)
Use your finger to apply a thin layer of Tear Mender to the denim while the other manus holds the tear open (if the auto seat has perforated holes in it, be careful non to apply so much that it leaks through the leather).
Printing the leather downwardly onto the denim and permit to dry for three minutes!

How to fix surface harm or cracked leather on your motorcar seat:

Dispense Tear Mender into a dispensable bowl or loving cup. Dip your finger in the Tear Mender and use it to fill in the low points of the cracks and surface tears. Allow to dry. (Don't worry--information technology will adhere merely to the fibrous material downward in the scissure, and you will exist able to wipe or skin it off the shiny finished surface of the leather).
Depending on how deep or croaky the damage is, you may want to repeat step 1 a few times, to completely fill in the damaged expanse and restore the strength of the leather.
Use an emery board (a disposable nail file) to sand away the excess material glue and remove the shiny cease in the area immediately surrounding the damage. (This stride is like patching a wall--use the emery board to 'sand' the damaged area and stale Tear Mender until you lot have a affluent, matte surface that will allow the finishing compound to adhere in the steps below).
Wipe the area with an alcohol pad so the finishing compound volition adhere to the surface.
Mix a combination of the three finishing compounds included in the Tear Mender Leather Repair kit (white, black, and brown) to friction match the color of your car seat. (My seat is night grey, then I mixed white and black until I had the right shade).
Apply a layer of the finishing chemical compound with a plastic spatula and permit it dry.
Repeat Step 6 until you take obscured the repair. (Y'all may want to gently absorb the final coat of finishing compound with a sponge to add a texture to the finishing compound and further match your leather).